Mode : O3
Deployment : Pole Mount
Application Scenarios : WISP CPE, Data transmission and Long range video surveillance
Frequency : 2.4GHz
Maximum wireless speed : 150Mbps
Interface : 2*10/100Mbps Ethernet Port
Antenna: 12dbi
Antenna Beamwidth : Horizontal: 60° / Elevation: 30°
Reset Button : 1
GND Terminal : 1
Power Consumption : 4.3W
Waterproof Level : IP64
LED : PoE/LAN,LED1,LED2,LED3
Power Method : 12V1A Passive PoE
Lightning Protection : 6000V
Passive PoE power supply
Passive power over ethernet via PoE/LAN ( 4,5pins -7,8pins)
Voltage range: 11-13.8V DC
Voltage range: 11-13.8V DC
Reception Sensitivity
MCS0: -96dbm
MCS7: -72dbm
MCS7: -72dbm
Operating mode : AP/Station/WISP/P2MP/WDS Repeater/Router
Standard & Protocol : IEEE 802.11b/g/n
Enable/Disable Wireless Radio : Support
SSID Hidden : Support
Wireless Client isolation : Support
SSID Isolation : Support
Client Limitation For SSID : Support
Wireless Access Control : Support
Weak Signal Client Limitation : Support
Transmit Power : Adjustable power by 1dBm
WMM Capable : Support
APSD Capable : Support
Wireless Security
64/128 WEP,WPA-PSK,WPA2-PSK,WPA&WPA2-PSK,WPA,WPA2
Transmission Media : Support
VLAN Tagging for SSID : Support
DHCP Server : Support
VPN Pass-through : PPTP,L2TP
Remote Web access : Support
Schedule Reboot : Support
Page Timeout : Support
Ping Watchdog : Support
Dyndns : noip, dyndns.org
Network Diagnoses
Ping, Traceroute, Signal Scan
Time&Date Setting : Support
Firmware Upgrade : Support
Backup/Restore Configuration : Support
Username Managerment : Support
Syslog : Support
Managed By Controller : PC Software — CPE Assistant
Operating Temperature:-30℃ ~ 60℃
Storage Temperature:-40℃ ~ 70℃
Storage Temperature:-40℃ ~ 70℃
Operating Humidity:10%~90% non-condensing
Storage Humidity:10%~90% non-condensing
Storage Humidity:10%~90% non-condensing
Default Settings
Default login IP:192.168.2.1
Default Login Username: admin
Default Login Password: admin
Default Login Username: admin
Default Login Password: admin
Reviews
There are no reviews yet.