Tenda TEF1106P-4-63W PoE Switch

Tenda TEF1106P-4-63W 6-Port PoE Switch for CCTV Networks

The Tenda TEF1106P-4-63W is an unmanaged Fast Ethernet switch designed to simplify small security camera installations. It combines four Power over Ethernet ports with two additional data ports, allowing compatible IP cameras to receive network connectivity and electrical power through Ethernet cabling. Designed for shops, offices, restaurants, and other compact surveillance environments, this desktop switch offers straightforward setup without complicated software or network management. It can connect essential equipment while keeping the wiring around your recording system organized.

Four PoE Ports and Two Uplinks

Ports one through four support IEEE 802.3af and 802.3at standards, supplying compatible powered devices with up to 30 watts on an individual port, subject to the shared power budget. Two separate 10/100Mbps data ports provide convenient connections to a router, network video recorder, or an existing network. These uplinks do not supply PoE power. This arrangement is practical for installations where cameras need power, but the recording and network equipment already have their own power sources.

Extend Mode for Longer Cable Runs

The Tenda TEF1106P-4-63W includes a hardware Extend Mode for selected surveillance applications. When enabled, PoE ports one through four operate at 10Mbps, allowing supported power and data transmission distances of up to 250 meters under suitable conditions. This feature may help position cameras farther from a monitoring desk than typical standard Ethernet arrangements allow. Performance depends on cable quality, connected devices, distance, and installation conditions. The reduced port speed should be considered when planning higher bandwidth camera streams.

Prioritized Surveillance Traffic

A built-in QoS priority function supports surveillance traffic during network congestion. The manufacturer identifies priority handling for ports one and two, providing an advantage where important video streams must share the available switching bandwidth. The device has a specified 1.2Gbps switching capacity and operates using store-and-forward technology. Each RJ45 connection remains limited to 100Mbps in standard mode. The aggregate capacity should not be confused with Gigabit port speed, because this model does not feature Gigabit Ethernet interfaces.

Protection and Practical Design

Tenda specifies lightning protection rated at 6kV for Ethernet ports and 4kV for the power connection. These measures provide additional electrical protection, although correct grounding and appropriate external surge protection remain important where required. The housing measures approximately 100 by 100 by 26 millimeters and supports desktop or wall mounting. Its compact body is useful beside a recorder, inside a suitable equipment area, or near a small network cabinet. Clear link indicators assist with basic connection checks.

Power Budget and Compatibility

The switch uses an external 51V, 1.25A power adapter. Manufacturer materials describe 63 watts for the overall device, while an earlier datasheet lists 58 watts as the maximum available PoE output. Check the supplied hardware revision and connected camera requirements before allocating power. Four powered devices cannot necessarily draw 30 watts simultaneously. This switch is intended for standards-compliant PoE equipment, not passive PoE accessories or devices that require higher power standards. It does not replace a router or independently provide internet access.

Installation Planning Tips

Before deploying cameras, calculate the combined PoE draw using each device’s rated consumption, including infrared illumination at night. Use suitable solid-copper network cable, avoid unnecessary joints, and test every run at its intended distance. Follow electrical and safety requirements for the installation.

Order Tenda PoE Equipment in Pakistan

Choose the Tenda TEF1106P-4-63W when you need a small PoE switch with dedicated uplinks, surveillance-focused features, and easy installation. Review camera power consumption, required cable lengths, and network speeds before purchasing. Explore the model at Smartlinks.pk to confirm current stock, warranty details, and compatible networking accessories for your CCTV installation.

Discover More from Tenda

Want to explore more about Tenda Network Switches? Visit the official Tenda website for product insights, support, and the latest smart security solutions.

Official Resource: Explore Tenda